OCS’s 60T Hydraulic Single Mooring Winch is used for pipe pulling operations. The winch comprise of a drum which is welded to a high tensile steel main shaft supported by a pair of bushing/bearing. A central pinion shaft is mounted on drive shaft and fitted with jaw clutches to allow drum to work. The drum is also fitted with a spring loaded and hydraulic release fail-safe band brake.

An auto spooling gear assembly is fitted in front of the drum for automatic spooling during operation. When spooling in wire rope, it will distribute the wire rope evenly and tightly onto the drum if the rope is under sufficient tension. The wire rope passes through two vertical rollers, which run on roller bearings around a high tensile steel spindle held in a fabricated steel carriage. This carriage is supported on a bright steel guide shaft and a high tensile steel lead screw.

The 60T Hydraulic Single Mooring Winch and power pack is associated with the services as per below

• PIPELINE SHORE APPROACHES
• PIPELINE PRE TRENCHING SERVICES
• PIPELINE POST TRENCHING SERVICES
• UTILITY BARGE, MULTICAT SUPPORT TUG